National Instruments VXI-MXI-Express Series User Manual page 41

Appendix A Specifications
Shock and Vibration
Safety
Note For UL and other safety certifications, refer to the product label or the
Product Certification
Electromagnetic Compatibility
In the United States (per FCC 47 CFR), Class A equipment is intended for use in
Note
commercial, light-industrial, and heavy-industrial locations. In Europe, Canada, Australia
and New Zealand (per CISPR 11) Class A equipment is intended for use only in
heavy-industrial locations.
VXI-MXI-Express Series User Manual
Operational shock ...................................30 g peak, half-sine, 11 ms pulse
Random vibration
Operating .........................................5 to 500 Hz, 0.3 g
Nonoperating ...................................5 to 500 Hz, 2.4 g
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
section.
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
• EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class A emissions
• AS/NZS CISPR 11: Group 1, Class A emissions
• FCC 47 CFR Part 15B: Class A emissions
• ICES-001: Class A emissions
(Tested in accordance with
IEC-60068-2-27; meets
MIL-PRF-28800F Class 2 limits.)
(Tested in accordance with
IEC-60068-2-64. Nonoperating
test profile exceeds the
requirements of
MIL-PRF-28800F, Class 3.)
A-6
rms
rms
Online
ni.com