Jackson TempStar Series Installation, Operation And Service Manual page 4

REVISION HISTORY
Revision Revision
Made by Applicable ECNs Details
Letter Date
Added view showing dimensions for the notch cut into
table on corner installations to pg. 4.
Corrected total amps and typical electrical circuit for
230 V, 50 Hz, 1 Phase LT/NB machines on pg. 7 to 35
A and 40 A, respectively.
Corrected P/N for item 6 on pgs. 36 and 39.
Changed item 19 to item 17 in Tube Length Chart on
pg. 51.
Changed valve (item 15) view and P/N to 04810-003-
71-56 on pgs. 51 and 52.
Changed valve (item 7) view and P/N to 04810-003-
71-56 on pg. 53.
Removed views that showed pressure regulator in
certain locations. Created Plumbing Options, pg. 54,
with the pressure regulator and arrestor as options.
U 3/14/17 JH N/A
Added wash arm end-cap as item #21 to pg. 58.
Added external device wiring instructions.
Added instructions for programming new exhaust fan
timer.
Added rinse arm bearing replacement instructions.
Updated schematics.
Changed name of delime switch throughout from
NORMAL/DELIME to AUTO/MANUAL.
Updated Delime Instructions and added instructions
for low-temp machine.
Added water level probe cleaning to the Shutdown
and Cleaning section.
Updated to new manual format.
Audited and corrected all P/Ns in the manual.
iv