Jackson TempStar Series Installation, Operation And Service Manual page 21

INSTALLATION
STEP ACTION
Apply power (120, 208, or 240 VAC) to the A1 & A2
1.
terminals.
2. Make control signal connection at B1. No control
signal is applied.
3. Apply control signal (logic high).
4. Remove control signal (logic low).
NOTE: In Step 4, if control signal is reapplied while the relay is still closed, Step 3 will restart.
07610-003-61-42-U
TESTING EXHAUST FAN TIMER
RESULT
Idle state.
Remains in idle state.
Relay closes (ports 15-18).
Relay remains closed for 2.5 minutes.
14