LS10143-001SK-E
3.6
Board Assembly Diagram
Trouble Relay
SLC
In/Out
Voice
Network
Data
Network
IP
Communication
SBUS Out
SBUS In
Figure 3-3 shows the circuit boards, metal housing and annunciator that attach the IFP-2100/ECS assembly to the
cabinet. If you should need to remove the board assembly for repair, remove the four mounting nuts which hold
the assembly in the cabinet. Then lift the entire assembly out of the cabinet. Do not attempt to remove the circuit
boards from the metal bracket.
Programmable
Alarm Relay
Chassis
Mounting
Nuts
Figure 3-3 Model IFP-2100 Assembly
3-6
Before You Begin Installation
AC
On-board Annunciator
Ethernet
Port
Phone lines
(non-power
limited)
USB Port
Flexput
Circuits
Battery
Connections