Agency Listings, Approvals, And Requirements; Federal Communications Commission (Fcc) - Honeywell IFP-2100 Installation And Operation Manual

Model IFP-2100/ECS Installation Manual
Section 2

Agency Listings, Approvals, and Requirements

2.1

Federal Communications Commission (FCC)

1. The following information must be provided to the telephone company before the IFP-2100/ECS can be
connected to the phone lines:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the inside
cover of this equipment is a label that contains, among other information, a product identifier. If requested, this
information must be provided to the telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with
the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord (not
provided) and modular jack must be utilized with this product. It is designed to be used with a modular jack that
is also compliant.
The REN (ringer equivalence number) provided on this installation sheet is used to determine the number of
devices that may be connected to the public switched telephone network. This number must not exceed 5.0.
Since this product has an REN of 1.0A, the number of devices is limited. The REN number is embedded in the
FCC registration number as 10A.
If the IFP-2100/IFP-2100HV/ IFP-2100ECS or IFP-2100ECSHV causes harm to the telephone network, the
telephone company will notify you in advance that the temporarily discontinuance of service may be required.
But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also,
you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect
the operation of the equipment. If this happens the telephone company will provide advance notice in order for
you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with the IFP-2100/IFP-2100HV/ IFP-2100ECS or IFP-2100ECSHV, for repair or
warranty information, please contact Honeywell Farenhyt Series at 1-800-328-0103 or www.farenhyt.com. If the
equipment is causing harm to the telephone network, the telephone company may request that you disconnect the
IFP-2100/IFP-2100HV/ IFP-2100ECS or IFP-2100ECSHV until the problem has been resolved.
This product cannot be adjusted or repaired in the field. It must be returned to the factory for service.
This equipment is not designed for use with party line service. Connection to party line service is subject to state
tariffs. You may contact the state public utility commission, public service commission or corporation
commission for information.
Since the IFP-2100/IFP-2100HV/ IFP-2100ECS or IFP-2100ECSHV are commercial fire alarm panels, it must
be connected upstream of all other equipment utilizing the phone lines. If you have questions about the
A Manufacturer:
B Model Number:
C FCC registration number: US: HS9AL10A2100
Ringer equivalence:
D Type of jack:
E Facility Interface Codes:
F Service Order Code:
Honeywell Silent Knight
IFP-2100; IFP-2100ECS
1.0A
RJ31X
Loop Start: 02LS2
9.0F
2-1
LS10143-001SK-E