Table of Contents
Advertisement
Model IFP-2100/ECS Installation Manual
1.
Enter the installer code. The panel will automatically go to the main menu.
2.
Select 6 for Network Programming.
3.
Press 4 to enter the Computer Access menu.
4.
Enter the computer access number (up to 6-digits), then press ENTER.
5.
Enter the computer code, then press ENTER.
6.2.5
Access Codes
Access codes provide the user access to the control panel functions. Each access code can be customized for each
user. This allows some users the ability to access programming and other higher level panel functions, while
other users may only need access to lower level functions such as preforming fire drills, or acknowledging
trouble conditions.
Profile 1 is the profile that dictates what functions the Fire Fighter Key has access to. Because this is the profile
for a key, the user name and the access code can not be edited for this profile.
Profile 2 is the profile for the installer and is referred to as the "Installer Code". This profile's user name and
panel functions can not be edited. Table 7-9 lists the panel functions that can be selected for each user profile.
:
Table 6-1
User Profile Selectable Panel Functions
Type of Function
Panel Operations
Panel Menus
Selectable Functions
System Reset
System Silence
System Ack
Fire Drill Key
Multi-site
F1 Function Key
F2 Function Key
F3 Function Key
F4 Function Key
ECS Control Request Function
ECS Super User Function
System Tests
Fire Drill Menu
Indicator Test
Walk Test-No Report
Walk Test -With Report
Communicator Test
Clear History Buffer
Point Functions
Disable/Enable Point
Point Status
Set SLC Device Address
SLC Single Device Locator
SLC Multiple Device Locator
I/O Point Control
Event History
6-3
LS10143-001SK-E
Advertisement
Table of Contents
Troubleshooting
