Related Manuals for Honeywell TA3840
Summary of Contents for Honeywell TA3840
- Page 1 Data Processing Racks TA3840 Installation Manual SAS au Capital de 2 158 244 € - 444 871 933 R.C.S. Bourges - APE : 2651B Headquarter : 9, rue Isaac Newton - 18000 Bourges - France...
- Page 2 Data Processing Racks Installation Manual TA3840 Edition Released February 2013...
- Page 3 INTRODUCTION This manual is issued specifically for the data processing racks of the TA3840 or EMx40 system. It contains instructions detailed for the installation of this system. To use it in an optimal way, we advise you TO READ CAREFULLY THESE INSTRUCTIONS and to respect them throughout the life of the equipment.
- Page 4 The safety instructions given in this manual are merely given for guidance purposes to protect you and all those using and working on our equipments. Honeywell Marine cannot foresee all dangerous situations that might arise. This is why the owner and/or the operator is responsible for the operating safety of the system.
-
Page 5: Table Of Contents
4-20 mA analog inputs board ....................17 Multifunction board ........................20 TA3840S CPU board (optional) ....................21 Configuration ..........................21 TA3840R CPU board (optional) ....................22 7. COMMISSIONING ........................22 8. APPENDIX B - TA3840 SYSTEM / RETURN FOR REPAIR FORM ........... 23... -
Page 6: Unpacking And Storage
Take care not to damage the front panel with LCD screen and keyboard of the communication unit and remote display unit (if present). Storage There is no particular requirement. The storage temperature of the TA3840 system is 0 °C to +70 °C. 2. SYSTEM DESCRIPTION... -
Page 7: Installation Of The Racks
3. INSTALLATION OF THE RACKS If the racks are not pre-mounted in a cabinet supplied by Honeywell Marine, they must be installed in a standard 19" frame. ● Introduce each rack in its housing. ● Fix it with the 4 screws provided for this purpose (flat screwdriver). - Page 8 If the rack is delivered in a cabinet by Honeywell Marine, connecting points 1, 2 and 4 are pre-wired. Connect the supply cable 24 Vdc to the terminal block, respecting the polarity. WARNING : The TA3840C is powered by 24 Vdc.
- Page 9 Imperatively connect all cable shielding to the grounding bar. Connect a metal braid between the grounding bar and the metallic frame in which the racks are installed. Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual...
-
Page 10: Ta3840C A/D- Analog Data Collection Unit
25 to 48 49 to 72 73 to 96 If the rack is delivered in a cabinet by Honeywell Marine, connecting points 1 and 4 are pre-wired. Doc No: MI5008E – Revision 7 – ENG Data Processing Racks... - Page 11 Imperatively connect all cable shielding to the grounding bar. Connect a metal braid between the grounding bar and the metallic frame in which the racks are installed. Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual...
-
Page 12: Ta3840S - Safety Unit
● Check the On/Off switch on the front panel is in "Off" position. If the rack is delivered in a cabinet by Honeywell Marine, connecting points 1 and 2 are pre-wired. Connect the mains supply cable to the terminal block (neutral and phase wires) using wires max. 3 x 2.5 mm². - Page 13 RS485 Þ connect the cable, respecting the identification of A, B and ground wires. The CPU board must be configured according to the transmitter type (refer to "Configuration of the boards" chapter). Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual...
-
Page 14: Ta3840R - Remote Display Unit
Connect the dry contact output for alarms (data and system). The jumpers of the remote display unit electronic board are factory pre-set and must not be moved. Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual... -
Page 15: Configuration Of The Boards
(option), or multifunction boards (option) TA3840C A/D - Data collection unit Only the items 1 and 3 are present. The front panel is blind. Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual... -
Page 16: Power Supply And Communication Board
4 communication ports. JP2/ JP6/ JP10/ JP12 JP13 JP16 JP14/ ● Position the jumpers according to the communication type for relevant port. Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual... -
Page 17: Ma Analog Inputs Board
A series of jumpers (JP) placed on the electronic board is used to select the transmitter type and channel numbers. They are factory pre-set and must not be moved. Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual... - Page 18 17 to 24 25 to 32 33 to 40 41 to 48 The jumper's position is given with the connector of the electronic board on the right side. Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual...
- Page 19 Addresses Close Close Close Close Open Open Open Open Close Close Open Open Close Close Open Open JP10 Close Open Close Open Close Open Close Open Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual...
-
Page 20: Multifunction Board
- JP1 must be placed down for 2 wires transmitters. The jumper position is given with the connector of the electronic board on the right side. Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual... -
Page 21: Ta3840S Cpu Board (Optional)
The jumper's position is given with the connector of the electronic board on the right side. ● ST3 is factory pre-set and must not be moved. Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual... -
Page 22: Ta3840R Cpu Board (Optional)
TA3840C rack and radar transmitters commissioning are carried out using the COM3840 software. System use is described in the chapter "Operation in normal mode" of the technical manual MT5008E Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual... -
Page 23: Appendix B - Ta3840 System / Return For Repair Form
8. APPENDIX B - TA3840 SYSTEM / RETURN FOR REPAIR FORM Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual... - Page 24 Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual...
- Page 25 Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual...
- Page 26 Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual...
- Page 27 92266 FONTENAY AUX ROSES (France) Bourges, le 15 mars 2013 L. MAUDUIT Responsable Technique dûment autorisé à signer Bourges, March 15 , 2013 Technical Manager with legally effective signature Doc No: MI5008E – Revision 7 – ENG Data Processing Racks TA3840 Installation Manual...
- Page 28 Honeywell Marine SAS 9, Rue Isaac Newton 18000 Bourges France Tel + 33 (0) 2 48 23 79 01 Fax + 33 (0) 2 48 23 79 03 E-mail: contact.marine@honeywell.com MI5008E-rev07-ENG www.honeywellprocess.com February 2013 © 2013 Honeywell International Inc.