SMART7-I and SMART7-W Wi-Fi Configuration Overview
5.5 SMART7-I and SMART7-W Wi-Fi Changes
Various default Wi-Fi settings can be changed and Wi-Fi can be disabled.
5.5.1 Change the Wi-Fi Passkey
The term passkey and password are the same.
1. Start a CLI session with the receiver.
Use a Ethernet or Serial (COM) port connection.
2. Use the WIFIAPPASSKEY command to change the Wi-Fi passkey.
WIFIAPPASSKEY NewPasskey
The new passkey must be a null terminated ASCII string that is 8 to 64 characters long.
The passkey will not change until the Wi-Fi transceiver has been restarted.
3. Use the WIFIMODE command to restart the Wi-Fi transceiver.
WIFIMODE AP
4. Use the SAVECONFIG command to store the change in Non-Volative Memory.
This ensures the new passkey is kept when the receiver is restarted.
SMART7 Installation and Operation User Manual 0C
85