SMART7 Operation
Rover Setup
1 Mount the SMART7
2 Connect a fused power supply (user
supplied)
3 Connect a radio device to COM2 (user
supplied)
4 Connect a storage device to COM1
(user supplied)
To receive corrections, a data link between the base station and the rover station is required.
The base and rover stations can both be NovAtel receivers, however NovAtel receivers will work
with some other brands. Contact Customer Support for further details (refer to Customer Sup-
port on page 14 for details).
SMART7 Installation and Operation User Manual 0C
Figure 9: Basic Differential Setup
Base Setup
1 Mount and connect a GNSS antenna
2 Connect a fused power supply (user supplied)
3 Connect a radio device to COM2 (user supplied)
4 Connect a computer to COM1 for setup and monitoring
(user supplied)
35