Set And Clear Mask For All Status Code Arrays - Novatel SMART7 Installation And Operation Manual

Chapter 5 Built-In Status Tests
masked bits in the auxiliary 1 status word. Likewise, bit 30 of the receiver status word cor-
responds to the auxiliary 2 status word and bit 29 to the auxiliary 3 status word.
Refer also to the RXSTATUS log in the
more detailed description.

5.2.6 Set and Clear Mask for all Status Code Arrays

The other two mask words in the status code arrays operate on the associated status word in the
same way. These mask words are used to configure the bits in the status word that result in a
RXSTATUSEVENT log broadcast. The set mask is used to turn logging on temporarily while the
bit changes from the 0 to 1 state. The clear mask is used to turn logging on temporarily while
the bit changes from a 1 to a 0 state. Note the error word does not have any associated mask
words. Any bit set in the error word results in a RXSTATUSEVENT log broadcast (unless
unlogged).
Refer also to the RXSTATUS log in the
more detailed description.
SMART7 Installation and Operation User Manual 0C
Agriculture Commands and Logs Reference Manual
Agriculture Commands and Logs Reference Manual
for a
for a
80