Table of Contents
Advertisement
AdonisC2_EN_b-f_FM.book Page 75 Tuesday, January 23, 2001 4:45 PM
Error Messages and Their Meanings
If there is an error, one of the following messages may appear on the display. It
might just flash briefly, so if you are watching for errors, stay by the machine and
check the display.
Message
Put original back, check it and press [Start].
Error occurred, and transmission was can-
celed.
Cannot detect original size. Place original
again, then press [Start].
LCall Service
Functional problems with facsimile. Please call
service.
Memory is full. Cannot scan more. Transmit-
ting only scanned pages.
Error Messages and Their Meanings
Problem and Solution
Original jammed during Memory Transmis-
sion. Reset originals that have not been
scanned.
A document jam occurred during Immediate
Transmission. Press [OK] and re-send the page
which has been not sent.
An error occurred during Immediate Trans-
mission. Press [OK] and re-send the original.
Note
❒ There may be a problem with the machine
or the telephone line (for example noise or
cross talk). If the error re-occurs frequently,
contact your service representative.
The machine failed to detect the size of the
original. Reset originals and press the {Start}
key.
There is a problem with the fax function.
Record the code number shown in the display
and contact your service representative. The
copier function will still work normally.
If you press [OK], the machine returns to the
standby mode and starts transmitting pages
which has been scanned.
4
75
Advertisement
Table of Contents
