Table of Contents
Advertisement
AdonisC2_EN_b-f_FM.book Page 12 Tuesday, January 23, 2001 4:45 PM
Getting Started
8.
Displays Quick Operation Keys
set for often used functions.
[TX File Status] and [Dest. Management] are
preset.
1
9.
Displays various functions for
transmitting.
Additional transmitting functions.
Standby Display
While the machine is in standby mode (immediately after the {Facsimile} key is
pressed or after the {Clear Modes} key is pressed), the following display is shown.
❖ ❖ ❖ ❖ Memory Transmission
❖ ❖ ❖ ❖ Immediate Transmission
Note
❒ To return the machine to standby mode, do one of the following:
• If you have set the original and have not pressed the {Start} key, remove
the original.
• If you have not set an original, press the {Clear Modes} key.
• If you are in User Tools mode, press the {User Tools/Counter} key.
12
10.
Displays the programed desti-
nations.
Displays the Quick Dial table of pro-
gramed destinations.
Advertisement
Table of Contents
