Table of Contents
Advertisement
AdonisC2_EN_b-f_FM.book Page 76 Tuesday, January 23, 2001 4:45 PM
Troubleshooting
When the {Facsimile} key is Lit in Red
If this key is lit, refer to the table below and take the appropriate action.
Problem
Paper has run out.
The paper output tray is full.
The machine is in RDS (Remote Diagnostic
System) mode.
A facsimile error has occurred.
4
Toner is empty.
76
Solution
Add paper.
⇒ "Loading Paper" in the Copy Reference
Remove the paper from the tray.
Wait with the Main Power switch on. Machine
will go to the standby mode after it exits from
the RDS mode.
The facsimile has a problem. Contact a service
representative. The copier will still function
normally.
Replace the toner cartridge.
⇒ "Adding Toner" in the Copy Reference
Advertisement
Table of Contents
