Table of Contents
Advertisement
AdonisC2_EN_b-f_FM.book Page 36 Tuesday, January 23, 2001 4:45 PM
Faxing
Scan Settings
You may wish to send many different
types of fax messages. Some of these
may be difficult to reproduce at the
other end. However, your machine
has three settings that you can adjust
2
to help you transmit your document
with the best possible image quality.
❖ ❖ ❖ ❖ Resolution:
Standard, Detail, Super Fine (op-
tion)
❖ ❖ ❖ ❖ Image density:
Auto Image Density, Manual Im-
age Density (7 levels)
❖ ❖ ❖ ❖ Original Type:
Text, Text/Photo, Photo
Resolution
Images and text are scanned into the
machine by converting them to se-
quences of dots. The frequency of dots
determines the quality of the image
and how long it takes to transmit.
Therefore, images scanned at high res-
olution (Super Fine) have high quality
but transmission takes longer. Con-
versely, low resolution (Standard)
scanning results in lower quality but
your original is sent more quickly.
Choose the setting that matches your
needs based upon this trade off be-
tween speed and image clarity.
❖ ❖ ❖ ❖ Standard (8× × × × 3.85lines/mm, 200× × × × 100dpi)
Select for originals containing nor-
mal sized characters.
❖ ❖ ❖ ❖ Detail (8× × × × 7.7lines/mm, 200× × × × 200dpi)
Select for originals containing
small characters or when you re-
quire greater clarity. This resolu-
tion is twice as fine as Standard.
36
❖ ❖ ❖ ❖ Super Fine (optional Expansion Mem-
ory required: 16× × × × 15.4lines/mm,
400× × × × 400dpi)
Select for originals with very fine
details or when you require the
best possible image clarity. This
resolution is eight times as fine as
Standard.
Limitation
❒ If the other party's machine does
not support the resolution at
which you are sending, this ma-
chine automatically switches to a
resolution which is supported.
❒ Sending with Super Fine resolu-
tion requires that your machine
has the optional Expansion Memo-
ry and the other party's machine
has the capability to receive fax
messages at Super Fine resolution.
❒ Note that even if the option is in-
stalled on your machine, transmis-
sion and reception may take place
using Detail resolution if the other
party's machine does not support
this feature. ⇒ Chapter 4, "Printed
Report" in the Advanced Features
manual
Note
❒ When the machine is turned on or
modes are cleared, the resolution is
set to Standard by default. You can
change this with the [Gen. Settings/
Adjust] key. ⇒ Chapter 7, "General
Setting/Adjustment" in the Ad-
vanced Features manual
❒ By default, the resolution returns
to the home setting after every
transmission. You can change this
with the [Gen. Settings/Adjust] key.
⇒ Chapter 7, "General Setting/
Adjustment" in the Advanced Fea-
tures manual
Advertisement
Table of Contents
