Setting A Single Original On The Exposure Glass - Savin 1045 Facsimile Reference Manual

AdonisC2_EN_b-f_FM.book Page 17 Tuesday, January 23, 2001 4:45 PM
- How to set A4, B4, A3, Lt, LG -
- -
and DLT size originals
Original
Exposure glass
*1
*2
Note
❒ When you set originals in the ADF
as shown in the above illustration,
the Fax Header will be printed on
the received faxes at the destina-
tion as follows:
• *1 On the upper end of printings
• *2 On the left end of printings
- - How to set A4, A5 and B5 size - -
originals
Original
Exposure glass
*2
*1
Limitation
❒ A5 size documents are not detect-
ed the exposure glass. Load A5
size documents in the ADF.
Where original is set
Document Feeder(ADF)
Where original is set
Document Feeder(ADF)
Note
❒ When you set originals on the ADF
as shown in the above illustration,
the Fax Header will be printed on
the received faxes at the destina-
tion as follows:
• *1 On the upper end of printings
• *2 On the left end of printings
Setting a Single Original on
the Exposure Glass
Set originals that cannot be placed in
the Document Feeder (ADF), such as
a book, on the exposure glass one
page at a time.
A
Lift the Document Feeder (ADF)
by at least 30 degrees. Place the
original face down and align its
upper left corner with the refer-
ence mark at the upper left corner
of the exposure glass.
1.
Reference mark
2.
Scale
Note
❒ If you do not raise the Docu-
ment Feeder (ADF) by at least
30 degrees, the original size will
not be detected.
Setting Originals
2
17