Table of Contents
Advertisement
to set the 45° fence stop:
1.
loosen the fence tilt lock, and position the
fence against the 45° stop bolt.
2.
loosen the lock nut on the 45˚ fence stop bolt
(figure 83).
45° stop Bolt
lock nut
figure 83. adjusting fence 45˚ outward.
3.
adjust the 45˚ stop bolt until the fence is
exactly 45° outward while resting on the bolt
(check the angle with a sliding bevel set to
135° or with a 45° square.
4.
retighten the lock nut loosened in step 2.
Model G0634Z/G0634XP (Mfd. Since 01/11)
setting fence stops
(g0634Xp)
the fence stops simplify the task of adjusting the
fence to 45˚ and 90˚.
items needed
45° square ........................................................ 1
90° square ........................................................ 1
sliding Bevel ...................................................... 1
wrench 10mm ................................................... 1
wrench 12mm ................................................... 1
hex wrench 3mm .............................................. 1
hex wrench 4mm .............................................. 1
to set the 90˚ fence stop:
1.
loosen the lock nut on the 90° fence stop
screw shown in figure 84, and loosen the
fence tilt knob.
lock nut
figure 84. adjusting fence to 90°.
2.
place a 90° square against the table and
fence, and adjust the stop screw so the fence
is set exactly at 90°.
3.
tighten the lock nut.
Qty
90˚stop screw
-57-
Advertisement
Table of Contents
