Table of Contents
Advertisement
fence
oil type ................sB1365 or iso 68 equivalent
oil amount ...........................................1–2 drops
lubrication Frequency ....................... as needed
place one or two drops of iso 68 machine oil on
fence pivot points and other lubrication locations
as needed (refer to figure 55 or 56 for your spe-
cific machine model number).
figure 55. g0634z fence lubrication locations.
figure 56. g0634Xp fence lubrication locations.
Model G0634Z/G0634XP (Mfd. Since 01/11)
Jointer tables
oil type ................sB1365 or iso 68 equivalent
oil amount ...........................................1–2 drops
Frequency .......................................... as needed
the jointer infeed and outfeed table elevation
knobs and pivot points require periodic lubrica-
tion. raise and secure tables in up position and
lubricate with iso 68 machine oil as needed (see
figures 57–58). wipe off excess oil and sawdust
with a cloth.
figure 57. Jointer infeed table lubrication
locations.
figure 58. Jointer outfeed table lubrication
locations.
-45-
Advertisement
Table of Contents
