States Logic Diagram - PEUGEOT E1A Workshop Manual

PEUGEOT ELECTRONIC TESTER (TEP 96) USER INSTRUCTIONS

States logic diagram:

List of the machine accessory states having an effect on ECU functioning
STATES OF SCOOTER P1
Pin cod = LOCKED
UNLOCKED
Mode = ECONOMICAL
NOMINAL
HANDLING
Contact = ON
OFF
STATES OF SCOOTER P2
Stand = FOLD BACK
FOLD DOWN
Security = ON
OFF
Plug 230V = CONNECTED
DISCONNECT
STATES OF SCOOTER P3
Accelerat =
Maintenance =
Phase =
OVERCHARGE
WATER AUTHORISED
Reproductions or translations, even parrtial, are forbidden without the written consent of Peugeot Motocycles
ACTIVATED
RELEASED
ACTIVE
INACTIVE
CHARGE
ROLLING
Machine waiting for code
The code is entered and the machine is in drive mode
Drive mode, Max sp. 30 km/h
Drive mode, Max sp. 45 km/h
Drive mode, Max sp. 7 km/h
Machine power on
Machine power off
The safety button is in the drive position
The safety button is in the motor off position
The charge connector is connected to the 220 V mains
The charge connector is not connected to the 220 V
Machine undergoing battery maintenance charge
Machine undergoing normal charge
Machine being charged with a current of 50 A
Machine being charged with a current of 5 A
Machine is undergoing maintenance charge and hatch
opening authorised for filling battery with
demineralised water
Machine is in utilisation mode. Service, economy or
nominal
Page: 16