PEUGEOT ELECTRONIC TESTER (TEP 96) USER INSTRUCTIONS
Actuators logic diagram:
Testing the machine actuators is used to check they are functioning at the time of diagnostic
TESTS SWITCHES :
⇓
Accelerator
♦
Keyboard
♦
Contact key
OTHER SWITCHES
♦
Brake lever
♦
Security switch
♦
Rolling switch
OTHER SWITCHES
♦
Gauge
⇑
Batt. hatch cover
Reproductions or translations, even parrtial, are forbidden without the written consent of Peugeot Motocycles
TEST ACCELERATOR
0%← ACTIVATE→100%
* TEST KEYBOARD *
Press down on a key
Of the scooter
TEST CONTACT KEY
Switch off
TEST BRAKE LEVER
Activate the
brake lever
TEST SECURITY SWITCH
Turn the switch
off
TEST ROLLING SWITCH
Press down on the
rolling switch
* TEST OF THE GAUGE *
Check gauge
=
0%
•
And press down on :
TEST BATTERY HATCH
Open the hatch
* TEST KEYBOARD *
KEY READ : 1
(Voltage = 1.75 V)
TEST CONTACT KEY
Switch on
TEST BRAKE LEVER
Release the
brake lever
TEST SECURITY SWITCH
Set button to
off
TEST ROLLING SWITCH
Release the
Rolling switch
* TEST OF THE GAUGE *
Check gauge
=
50%
•
And press down on :
TEST BATTERY HATCH
Shut the hatch
TEST CONTACT KEY
Result :
CONTACT GOOD
TEST BRAKE LEVER
Result :
CONTACT BRAKE GOOD
TEST SECURITY SWITCH
Result :
SWITCH GOOD
TEST ROLLING SWITCH
Result :
SWITCH GOOD
* TEST OF THE GAUGE *
Check gauge
= 100%
•
And press down on :
TEST BATTERY HATCH
RESULT:
CONTACT OF HATCH
GOOD
Page: 15