Table of Contents
Advertisement
Super X11DSC+ User's Manual
DIMM Installation
1. Insert DIMM modules in the following
order: P1-DIMMA1, P1-DIMMD1, P1-
DIMMB1, P1-DIMME1, and P1-DIMMC1,
P1-DIMMF1. For the system to work
properly, please use memory modules
of the same type and speed on the
motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Press the release tabs on both ends of the
DIMM socket to release the DIMM module from
the socket as shown in the drawing below.
Warnings: 1. Please do not use excessive force when pressing the release tabs on the ends
of the DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page
1 of this chapter to prevent ESD-related damages to your memory modules or components.
JUIDB1
IPMI_LAN
(UID)
JSDCARD1
UID-LED
LAN
JP2
CTRL
BMC
USB 0/1 (3.0)
LEDBMC
JI2C_FP1
JVRM_SEL1
1
JF1
LEDPWR
HDD_LED1
JSD2
I-SATA3
CPU2
1
JSD1
SP1
I-SATA2
JBAT1
DESIGNED IN USA
X11DSC+
REV:1.00
BAR CODE
BIOS
IPMI CODE
LICENSE
PCH
JTPM1
JPWR3
JBT1
Release Tabs
Press both notches
straight down into
the memory slot.
38
VGA
COM1
CPU2_MEMORY_LED CPU1_MEMORY_LED
CPU1 SIOM PCI-E 3.0 x16
CPU1
JNVME0
JNVME3
JPI2C1
P1_NVMe0
P1_NVMe3
JPWR2
JPWR1
JNVME1
JNVME2
P1_NVMe2
P1_NVMe1
Notches
Advertisement
Table of Contents
