Supermicro X11DSC+ User Manual page 180

Super X11DSC+ User's Manual
Configure ISID
The default value (in 6 bytes) is derived from the MAC address of the NIC port that you
selected earlier. Enter the last three bytes of desired MAC address to update this item.
Enable DHCP
Use this item to disable/enable dynamic host configuration protocol (DHCP) server service
for the iSCSI initiator. The options are Disabled and Enabled.
Note: Set the item, Enable DHCP, to Disabled if you would like to specify the iSCSI
initiator IP address/subnet mask/gateway.
180