Table of Contents
Advertisement
C
I
ontaCt
nformatIon
• www.supermicro.com (Email: support@supermicro.com)
• Manuals: https://www.supermicro.com/support/manuals
• Drivers & Utilities: https://www.supermicro.com/wdl/driver/
• Safety: https://www.supermicro.com/about/policies/safety_information.cfm
LED Indicators
LED
BMC LED
LED1
LED3, LED5, LED6, LED7
LED4
LED8
CPU and Memory Support
The X13SWA-TF motherboard supports a single Intel Xeon W-3400 (112L)/ W-2400 (64L) series processor in Socket E1 LGA4677.
• For Intel Xeon W-3400 series processors (112L): support up to 1TB of ECC RDIMM and 4TB of 3DS RDIMM with speeds of up to
4800 MT/s (1DPC) and 4400 MT/s (2DPC) in 16 ECC DDR5 (288-pin) SMD DIMM slots.
• For Intel Xeon W-2400 series processors (64L): support up to 512GB of ECC RDIMM and 2TB of 3DS RDIMM with speeds of up to
4800 MT/s (1DPC) and 4400 MT/s (2DPC) in eight ECC DDR5 (288-pin) SMD DIMM slots (DIMMA1/2, DIMMB1/2, DIMME1/2, and
DIMMF1/2).
Populating these DIMM slots with a pair of memory modules of the same type and size will result in interleaved memory, which will
improve memory performance.
Notes: 1) For memory optimization, use only DIMM modules that have been validated by Supermicro. For the latest memory updates,
please refer to our website at https://www.supermicro.com/products/motherboard.
2) Always connect the power cord last, and always remove it before adding, removing, or changing any hardware components.
Memory Population Guidelines
•
It is recommended to use DDR5 DIMM models of the same size, type, and speed.
•
Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the slowest DIMM.
•
In a given channel, the black slot can be enabled only when the gray slot is populated first.
(Gray Slot) DIMMD1
(Black Slot) DIMMD2
(Gray Slot) DIMMC1
(Black Slot) DIMMC2
(Gray Slot) DIMMB1
(Black Slot) DIMMB2
(Gray Slot) DIMMA1
(Black Slot) DIMMA2
(Black Slot) DIMME2
(Gray Slot) DIMME1
(Black Slot) DIMMF2
(Gray Slot) DIMMF1
(Black Slot) DIMMG2
(Gray Slot) DIMMG1
(Black Slot) DIMMH2
(Gray Slot) DIMMH1
LED Indicators
Description
BMC Heartbeat LED
Onboard Power LED
M.2 LEDs for M.2-C01/M.2-C02/M.2-C03/M.2-C04
Unit Identifier (UID) LED
Status Code LED
DIMM Memory Installation
Color/State
Blinking Green: BMC Normal
Solid Green: Power On
Blinking Green: Device Working
Blue On: Unit Identified
Digital Readout
Towards the CPU
Towards the CPU
Advertisement
Table of Contents
