Table of Contents
Advertisement
Super X11DSC+ User's Manual
Attaching the Processor to the Narrow Processor Clip to Create
the Processor Package Assembly
To properly install the CPU into the narrow processor clip, please follow the steps below.
1. Locate pin 1 (notch A), which is the triangle located on the top of the narrow processor
clip. Also locate notch B and notch C on the processor clip.
2. Locate pin 1 (notch A), which is the triangle on the substrate of the CPU. Also, locate
notch B and notch C on the CPU as shown below.
3. Align pin 1 (the triangle on the substrate) of the CPU with pin 1 (the triangle) of
the narrow processor clip. Once they are aligned, carefully insert the CPU into the
processor clip by sliding notch B of the CPU into notch B of the processor clip, and
sliding notch C of the CPU into notch C of the processor clip.
4. Examine all corners of the CPU to ensure that it is properly seated on the processor
clip. Once the CPU is securely attached to the processor clip, the processor package
assembly is created.
Note: Please exercise extreme caution when handling the CPU. Do not touch the
CPU LGA-lands to avoid damaging the LGA-lands or the CPU. Be sure to wear ESD
gloves when handling components.
CPU (Upside Down)
w/CPU LGA Lands up
B
A
Align Notch B of the CPU
and Notch B of the Processor Clip
Align CPU Pin 1
C
Align Notch C of the CPU
and Notch C of the Processor Clip
Pin 1
C
CPU/Heatsink Package
B
(Upside Down)
A
30
B
Allow Notch B to
latch on to CPU
A
Processor Package Carrier (w/CPU mounted
on the Processor Clip)
Allow Notch C to
latch on to CPU
C
Advertisement
Table of Contents
