Table of Contents
Advertisement
Ipv4 PXE Support/Ipv6 PXE Support
To enable Ipv4/Ipv6 PXE boot support, use the arrow keys to select and set Ipv4 PXE Support/
Ipv6 PXE Support to Enabled.
Note: Enable both Ipv4 PXE Support and Ipv6 PXE Support to have iSCSI settings
available. In some cases, enabling either one item may also have iSCSI settings avail-
able depending on the configuration of iSCSI initiator and iSCSI target.
For the changes to take effect, save settings and restart the system. Then, press <Del> key
continuously during system boot to enter the BIOS Setup utility. When the BIOS main screen
appears, navigate to the Advanced tab. Use the arrow keys to select iSCSI Configuration and
press <Enter> to access the menu items.
Appendix G: Configuring iSCSI Settings
175
Advertisement
Table of Contents
