Supermicro X11DSC+ User Manual page 86

Super X11DSC+ User's Manual
Package C State Control
Custom)
Package C State
This feature allows the user to set the limit on the C-State package register. The options
are C0/C1 state, C2 state, C6 (non Retention) state, C6 (Retention) state, No Limit, and
Auto.
CPU T State Control
Custom)
Software Controlled T-States
This feature enables the software controlled T-States support. The options are Disable
and Enable
Chipset Configuration
Warning: Setting the wrong values in the following features may cause the system to malfunc-
tion.
North Bridge
This feature allows the user to configure the settings for the Intel® North Bridge.
 UPI Configuration
UPI Configuration
This section displays the following UPI General Configuration information:
• Number of CPU
• Number of Active UPI Link
• Current UPI Link Speed
• Current UPI Link Frequency
• UPI Global MMIO Low Base/Limit
• UPI Global MMIO High Base/Limit
• UPI Pci-e Configuration Base/Size
Degrade Precedence
Select Topology Precedence to degrade features if system options are in conflict. Select
Feature Precedence to degrade topology if system options are in conflict. The options
are Topology Precedence and Feature Precedence.
(Available when Power Technology is set to
(Available when Power Technology is set to
86