Dimm Installation; Dimm Removal - Supermicro X11QPL User Manual

DIMM Installation

1. Insert DIMM modules in the following
order: P1-DIMMA1, P1-DIMMA2,
then P1-DIMMB1, DIMMB2. For the
system to work properly, please use
memory modules of the same type
and speed on the motherboard.
2. Push the release tabs outwards on
both ends of the DIMM slot to unlock
it.
3. Align the key of the DIMM module
with the receptive point on the
memory slot.
4. Align the notches on both ends of
the module against the receptive
points on the ends of the slot.
5. Use two thumbs together to press
both ends of the module straight
down into the slot until the module
snaps into place.
6. Press the release tabs to the lock
positions to secure the DIMM module
into the slot.

DIMM Removal

Press the release tabs on both ends of
the memory module to unlock it. Once it
is loosened, remove the DIMM module
from the memory slot.
Warnings: 1. Please do not use excessive force when pressing the release tabs on the ends
of the DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket. 2.
Please handle DIMM modules with care. Carefully follow all the instructions given on Page 1
of this chapter to avoid ESD-related damages done to your memory modules or components.
UID
LED2
VGA IPMI_LAN LAN1
COM USB3.0
JBJ2
JPME1
1
SRW3 SRW4
JPCIE1 JPCIE3 JPCIE4 JPCIE5 JPCIE6
JPB1
JBR1
SRW1 SRW2 JPG1
J1
JP1
JTPM1
JUSB1
JPME2
JUSB2
JWD1
JL1
M.2-P M.2-P
JMD1 JMD2
VBAT
Battery
JBAT1
JB1
CPU2
P2_NVME0
JNVME_P2
IPMI CODE
BIOS LICENSE MAC CODE
P3_NVME0
CPU3
JNVME_P3
FAN1
1
JC1
FAN3
FAN2
PSU1
Release Tabs
Press both ends
straight down into
the memory slot.
45
Chapter 2: Installation
JPCIE7 JPCIE2
P1_NVME0
X11QPL
REV:1.00
DESIGNED IN USA
JNVME_P1
JA1
JF1
JPWR2
CPU1
JPWR1
P4_NVME0
CPU4
FAN6
JD1
FAN4
FAN5
PSU2
Notches