Table of Contents
Advertisement
Super X11DSC+ User's Manual
Removing the Processor Heatsink Module (PHM) from the
Motherboard
Before removing the processor heatsink module (PHM), unplug power cord from the power
outlet.
1. Using a T30 Torx-bit screwdriver, turn the screws on the PHM counterclockwise to
loosen them from the socket, starting with screw marked #4 (in the sequence of 4, 3, 2,
1).
2. After all four screws are removed, wiggle the PHM gently and pull it up to remove it
from the socket.
Note: To properly remove the processor heatsink module, be sure to loosen and re-
move the screws on the PHM in the sequence of 4, 3, 2, 1 as shown below.
#4
#1
Printed Triangle on Motherboard
Removing the screws in
the sequence of 4, 3, 2, 1
#2
#3
34
CPU Socket
After removing the screws,
lift the Processor Heatsink
Module off the CPU socket.
Advertisement
Table of Contents
