Supermicro X11DSC+ User Manual page 178

Super X11DSC+ User's Manual
iSCSI Mode
Use this item to set the iSCSI mode. The options are Disabled, Enabled, and Enabled for
MPIO. Multipath I/O (MPIO) is a feature that allows the system to route I/O through the
available paths if the active path fails (be sure to have more than one physical path connected
to the system).
Note: Enabling the item, iSCSI Mode, is required for iSCSI configuration.
Internet Protocol
Use this item to set the Internet protocol. The options are IP4, IP6, and Autoconfigure.
178