Seam Programming Example - Pfaff 3588-05/020 Instruction Manual

Input
11

Seam programming example

.03
The following example describes the seam program input. A drawing with the corresponding
coordinate values serves as a programming guideline, see following illustration.
● Switch on the machine.
● Call up the input mode.
● Call up the seam program input function.
● If necessary, enter appropriate code number.
66
For the use of the seam program, the sewing jig and the corresponding part set
must match.
6,4 mm
x+
61 mm
122 mm
Schablonen-
nullpunkt
y+
x-
y-