Pfaff 3588-05/020 Instruction Manual page 57

Input
Conclude input
This function is used to conclude the input, and the machine changes into the sewing mode.
Mark block start
This function is used to defi ne the start of a block, see Chapter 11.02.01 Block functions.
Mark block end
This function is used to defi ne the end of a block, see Chapter 11.02.01 Block functions.
Block functions
This function opens a menu for entering block functions, see Chapter 11.02.01 Block func-
tions.
Image functions
This function opens a menu for entering image functions, see Chapter 11.02.02 Image func-
tions.
Coordinate reference points
This function is used to set the coordinates on the display at "0", in this way creating a new
reference point.
Edit
After selecting this function, the current section can be edited.
Insert
This function is used to insert functions or blocks, see Chapter 11.02.03 Inserting functions.
Delete
This function is used to delete the current section.
Sewing foot up/down
This function is used to raise or lower the sewing foot. In addition the thread trapper is ope-
ned or closed.
Search
With this function the sewing head is raised and the carriage can be moved near the desired
seam pattern point with appropriate direction symbols. After the position has been confi r-
med, the machine moves towards the nearest point of the seam pattern.
Tacting forwards
This function is used to move forwards in sections in the seam pattern tact for tact. The
seam cycle is sewn automatically, if the function is pressed longer.
Tacting backwards
This function is used to move backwards in sections in the seam pattern tact for tact. The
seam cycle is sewn automatically, if the function is pressed longer.
57