Selecting / Confi Guring A Sequence; Selecting A Sequence - Pfaff 3588-05/020 Instruction Manual

Preparation
9 Selecting / confi guring a sequence
.06
9

Selecting a sequence

.06.01
Instead of selecting a program number, it is also possible to select a corresponding se-
quence, providing that individual seam programs have been allocated to a sequence, see
Chapter 9.06.02 Confi guring a sequence
● Switch on the machine.
● Call up the menu for entering the program number.
● Call up the menu for entering the sequence.
● Select the desired sequence number (0 – 9) using the number block.
● Confi rm the selection and quit the selection menu.
Description of the other functions
Clear
This function sets the value at "0".
Arrow keys
These functions increase or reduce the value.
Esc
This function stops the input without taking over the value entered.
Program selection
This function opens the menu for selecting a program, see Chapter 9.05 Selecting a pro-
gram number.
Parts program
This function opens the menu for entering the parts program number.
38