Input
11
Seam program input via the "Teach-in" function
.02
This function is used to create the seam program by stitching a sewing pattern. A new creation
is always made, meaning that when selecting an already existing program it is overwritten.
11
.02.01
Example for seam program input via the "Teach-in" function
The seam program should
- contain 3 seam zones
- and be saved under program number 10
Switch the machine on.
Call up input mode.
Call up the "Teach-in" function.
Enter the template code, see chapter 9.10 Entering/changing the template code.
Adopt the code number entered.
68