Adjustment
13
Thread catcher height
.05.16
● Loosen screws 1 and 2.
● Position the thread catcher 3 above the bobbin case 4.
● Move the thread catcher 3 (screw 5) according to the requirement.
● Determine the vertical play of shaft 6, move retaining collar 7 against bearing housing 8
108
Requirement
The lower edge of the thread catcher 3 must be positioned at a distance of 0.8 mm
above the bobbin case 4.
3
4
Fig. 13 - 17
and tighten screw 2.
Screw 1 remains slightly unscrewed for further adjustments.
4
5
2
3
6
8
7
1