Position Of Folder Plates; Register 09; Register 10 - Pfaff 3588-05/020 Instruction Manual

13

Position of folder plates

.06.10
Requirement
1. The front edges of the folder plates 1 must be parallel to the die 4.
2. In the initial position, the folder plates 1 must be positioned on all sides approx.
0.1 mm under the lower edges of the strips of the die 4.
Fig. 13 - 39
● Remove the folder.
● Align folder plate 1 (screws 2) according to requirement 1.
● Insert the folder plates 1 one after another according to the control sequence (see chap-
ter 13.06.09 Control sequence of the folder plates) and align according to requirement
2 (screws 3).
● Remount the folder.
4
2
2
3
2
3
3
1
1
3
3
1
3
1
3 3
2
2
Adjustment
1
2
2
2
131