Program Interruption - Pfaff 3588-05/020 Instruction Manual

Sewing
Bobbin thread stitch counter
This function opens the menu for entering and resetting the number of stitches for the bob-
bin thread, see Chapter 9.09 Setting the bobbin thread stitch counter.
Automatic / manual sewing
This function is used to switch between automatic and manual sewing. The appropriate sym-
bol of the current operating mode is shown respectively.
Jig up/down
This function is used to raise or lower the jig.
Sewing foot up/down
This function is used to raise or lower the sewing foot. In addition the thread trapper is ope-
ned or closed.
Bobbin change
This function makes it possible to change the bobbin.
Stacker up/down
This function is used to open or close the stacker.
Basic position
This function is used to move the machine to the basic position.
Stop (only during the program cycle)
This function is used to stop the entire program cycle, see Chapter 10.04 Program interrup-
tion.
10

Program interruption

.04
The program cycle can be interrupted by operating the „stop" function on the control panel
or by pressing the stop keys.
By pressing this button the folder goes in home position.
● Continue the program cycle by operating the appropriate function
or
● Press the double start keys, see Chapter 7.04 Double start keys.
52
If the machine is stopped in this way, the sewing station
and the folder are not in their basic position!