Confi Guring A Sequence - Pfaff 3588-05/020 Instruction Manual

9 Confi guring a sequence
.06.02
Up to 4 seam programs can be allocated to a sequence. Each seam programs is allocated
to a parts program. During sewing, the seam programs of a selected sequence appear as a
function on the display with the parts program, and can be selected directly.
● Call up the menu for entering the sequence and select the desired sequence number wi-
thout leaving the selection menu, see 9.06.01 Selecting a sequence.
● Call up the sequence programming function.
● Confi gure the sequence from existing seam programs by entering the program numbers
on the number block.
● The cursor in the window shows, which seam program has been taken out of the group,
or at which position a new seam program has been inserted. The cursor is moved with
the arrow keys.
● If applicable, insert (INS) the seam program or parts program at the current cursor positi-
on, or delete (DEL) the marked seam program from the sequence.
● Conclude the sequence programming function.
To enable, for example, quicker access to up to 4 different seam programs, the
function for automatic switching to the next seam program of a sequence func-
tion can be switched off with parameter "112", see Chapter 13.10.02 List of pa-
rameters.
Preparation
39