Programming Examples; Example Of Seam Programming - Pfaff 1491E1 Instruction Manual

Needle position
When this function is active, the needle travels to its top position at the seam section end.
When this function is not active, the needle positions itself at its lowest point.
Program end
This function serves to end the seam program. The program data entered is checked.
11

Programming examples

.15
11

Example of seam programming

.15.01
The seam to be programmed is:
- to contain 5 seam sections
- and to be saved with the comment "seam 1"
- at program number 7.
Select INPUT mode.
1 2 3 4 5 6 7
Fig. 11 - 26
Select the programming function ( number key 4 ).
PROGRAM NUMBER: 0
[ PERMISSIBLE:
1 2 3 4 5 6 7
Fig. 11 - 27
7
Input program number 7.
Confirm this entry with the Enter key.
Enter
( Display for inputting comment Fig. 11-28 appears. )
The following display representations are only accurate if no program has been
inputted previously.
8 9 0
1 - 99 ]
8 9 0
Programming
Esc
Clear
Enter
Esc
Clear
Enter
11 - 18