Selecting A Program Station; Selecting A Sequence - Pfaff 3371-1 series Instruction Manual

Setting up
9

Selecting a program station.

.06.02
P3
9

Selecting a sequence

.06.03
C2
TE
9 - 6
With the machine in its basic position, select the desired program station, e.g. P3.
P3 P4 P5
P1 P2
X
20 2200 90
Only those program stations can be selected, which have been reserved
previously with a seam pattern with its respective speed and size factors, see
Chapter 11.01 Reserving program stations.
Speed and size factors cannot be changed directly in a seam program selected
via a program station.
With the machine in its basic position, select the desired sequence, e.g. C2.
P3 P4 P5
P1 P2
4 - 3 - 2 - 1 - 8 - 7 - 6 - 5 -
4 - 3 - 2 - 1 - 8 - 7 - 6 - 5
The next seam program waiting to be sewn is depicted by the relevant flashing
station number.
By selecting the menu function, the parameters of the current program station, such as
number of seam pattern, speed and size factors are shown.
With any desired plus/minus key the automatic sequence cycle is interrupted and the
machine moves to the previous or subsequent program station within the sequence.
Conclude the input by pressing the TE key. (The machine changes to the sewing mode).
P6 P7 P8
P
C1
Y
110
C2
C3
TE
P6 P7 P8
P
C1
C2
C3
TE