Table of Contents
Advertisement
Reverse Button with Indicator
For permanent reverse, press the button before starting
to sew. The reverse indicator will be lit and the machine
sews in reverse until you press the button again to
cancel. If you press the reverse button while sewing, the
machine sews in reverse for as long as you keep the
button pressed. The reverse indicator is lit when the
reverse button is pressed. Reverse is also used when
sewing darning stitches.
Sewing Mode/Embroidery Stitch-out
Mode Button
Press this button to enter sewing mode or embroidery
stitch-out mode.
Sequencing/Embroidery Edit Mode
Button
Press this button to enter sequencing. In embroidery
mode, press this button to open embroidery edit mode.
Alphabet Mode, Sequencing Button
In Sequencing, press this button to create text sequences
from various characters in two different fonts.
Settings Menu Button
Press this button to open the menu for machine settings.
Graphic Display
The graphic display lets you view all your selections and
options. Stitches are shown in real size (except for
buttonholes).
Stitch Width/Stitch Positioning Buttons
Increase or decrease the stitch width using the + and -
buttons. For straight stitches, use the + and - buttons to
change the stitch position.
In embroidery mode, use the + and - buttons to advance
forward through the stitches or step backwards. They
are also used for basting and adjusting height.
Cursor Buttons
By pressing the + and - buttons, cursor will move to
right and left.
In embroidery mode, the + and - buttons are used to
select hoop size, check position and rotation.
Stitch Length/Stitch Density Buttons
Increase or decrease the stitch length using the + and -
buttons. For satin stitches, use the + and - buttons to
change the density for the selected stitch.
28
In embroidery mode, use the + and - buttons to step
between different color blocks forward/backward, to
activate monochrome embroidery, or to adjust the width
of a design.
Direct Selection Buttons
By pressing one of, or a combination of, the 0 to 9
buttons, you select the stitch represented by that number
immediately.
In embroidery mode: select built-in design (1–15) or
built-in font (curlz: 200, 201, 202 or graphite: 300, 301,
302).
Load Button
Press this button to load a previously saved personal
stitch or sequence.
In embroidery mode, press this button to load an
embroidery design or font from an USB embroidery
stick.
Save Personal Stitch or Sequence button
Press this button to save a stitch or sequence to the
machine's memory.
Delete Button
For deleting stitches and letters in a sequence. Long
touch to delete the whole sequence.
Mirror End to End Button
For mirroring stitches and sequences end to end.
Mirror Side to Side Button
For mirroring stitches and sequences side to side.
Alt Button
When you select a satin stitch, the density settings will
be shown on the graphic display. By pressing the alt
button, the elongation will be shown instead of the stitch
density.
In embroidery mode, this button is used to switch
between two views of embroidery stitch-out.
Info Button
Press this button to toggle the recommendations view on
and off.
Press this button in embroidery mode to display
information about the loaded design.
Advertisement
Table of Contents
