Operating Procedure For Devices; Change Of Word Devices For Device Monitor - Mitsubishi MELSEC-F FX-10DM-E User Manual

FX-10DM-E DISPLAY MODULE
6.5

Operating procedure for devices

6.5.1

Change of word devices for device monitor

This paragraph describes the procedure to specify word devices.
Because a timer (T) occupies 2 lines, it is displayed as shown in the lowest screen above. A counter (C) is dis-
played in the same way. In the case of a data register (D or DD), it is displayed in the line below "D120".
Display Function 6
1.Introduction
2.Specifica-
tions
3.Installation
Wiring
Maintenance
4."SYSTEM
MODE"
Menu
5.Environ-
mental
Setting
"MONITOR
SET"
"OTHER"
6.Display
"ENTRY
MONITOR"
DEVICE
MONITOR
7.Attachment
ASCII codes
Setting sheet
Error mes-
sage list
6-23