Table of Contents
Advertisement
FX-10DM-E DISPLAY MODULE
6.3
Display setting procedure
1) Understand the display specifications. (Paragraph 6.3.1)
Check the contents of setting and display available in the "ENTRY MONITOR" display.
2) Design the display layout. (Attachment 7.2)
Write the desired display layout on the "ENTRY MONITOR" setting sheet.
In addition, write devices used in the setting and their occupation range.
3) Design the character display specifications. (Paragraph 6.3.2)
Learn the specifications of comments and messages and the restriction in display.
4) Check the 10DM setting screen. (Paragraph 6.3.3)
Read the explanation on the "ENTRY MONITOR" setting screen.
5) Understand operations of the 10DM. (Paragraph 6.3.4)
Learn operations on the "ENTRY MONITOR" setting screen.
6) Create comments. (Paragraph 6.3.5)
Register comments using the programming tool.
7) Create messages. (Paragraph 6.3.6)
Learn how to specify characters to be displayed using a sequence program.
8) Refer to the setting program example. (Paragraph 6.3.7)
Set actually the display example.
Display Function 6
1.Introduction
2.Specifica-
tions
3.Installation
Wiring
Maintenance
4."SYSTEM
MODE"
Menu
5.Environ-
mental
Setting
"MONITOR
SET"
"OTHER"
6.Display
"ENTRY
MONITOR"
DEVICE
MONITOR
7.Attachment
ASCII codes
Setting sheet
Error mes-
sage list
6-5
Advertisement
Table of Contents
