Table of Contents
Advertisement
FX-10DM-E DISPLAY MODULE
Table 1.3:
Key
*1
operation
Changes over the line selection mode to
the initial status (in which the cursor is not
displayed).
[CLR]
Changes over the mode from the line
selection mode (in which the cursor "!"
flickers) to the device selection mode (in
which the cursor "_" is displayed).
Deletes the setting of the line where the
cursor is located.
[FNC]+[CLR]
"ENTRY MONITOR", "RANGE OK" and
"DATA RANGE" in "MONITOR SET"
Cursor dis-
"!" flickers.
play
*1 In this manual, "[ ]" indicates a key.
When a line is selected
When a device (numeric value) is
selected
Cancels the input.
Allows to input another device in "DEVICE
MONITOR".
Reads the reset function.
"-" is displayed.
Introduction 1
1.Introduction
2.Specifica-
tions
3.Installation
Wiring
Maintenance
4."SYSTEM
MODE"
Menu
5.Environ-
mental
Setting
"MONITOR
SET"
"OTHER"
6.Display
"ENTRY
MONITOR"
DEVICE
MONITOR
7.Attachment
ASCII codes
Setting sheet
Error mes-
sage list
1-11
Advertisement
Table of Contents
