Table of Contents
Advertisement
FX-10DM-E DISPLAY MODULE
Display Function 6
6.5.5
Operating procedure to release keyword
If a keyword to protect programs is set in the PLC, when you try to change the data, the key-
word input request message appears to ask you to input the keyword.
By the procedure above, the keyword set in the PLC is temporarily released.
In order to validate the keyword again, turn off the power of the 10DM once. Then, the keyword stored in
the memory inside the 10DM is cleared, and the keyword set in the PLC becomes effective again.
6-28
Advertisement
Table of Contents
