Mitsubishi MELSEC-F FX-10DM-E User Manual page 63

FX-10DM-E DISPLAY MODULE
6) COMMENT+MES.
The comment, the device and the data are displayed, and the displayed contents can be
changed over to a message.
If D31 stores "K-1", the comment and the data are displayed (in the same way as "2: COM-
MENT" above). If there is not comment, the device name and the data are displayed (in the
same way as "1: MONITOR" above).
Program the device No. storing the message and the ASCII codes for the message in the
sequence program.
Set comment to D30 using the sequence programming tool, and transfer it to the PLC.
Display Function 6
Target devices: D and DD
6-9
1.Introduction
2.Specifica-
tions
3.Installation
Wiring
Maintenance
4."SYSTEM
MODE"
Menu
5.Environ-
mental
Setting
"MONITOR
SET"
"OTHER"
6.Display
"ENTRY
MONITOR"
DEVICE
MONITOR
7.Attachment
ASCII codes
Setting sheet
Error mes-
sage list