Product Configuration; Accessories; Options - Mitsubishi MELSEC-F FX-10DM-E User Manual

FX-10DM-E DISPLAY MODULE
1.6

Product configuration

The 10DM main body and accessories are packaged together as
shown below. Make sure that all accessories are packaged.
1.6.1

Accessories

1) Common accessories
Packing (made of rubber)
1.6.2

Options

Model name
indication
Bracket (made of plastic)
´1
Table 1.2:
Cable model name
FX-20P-CAB0
FX-20P-CAB0/EN
FX-20P-CAB
Action to comply with the CE marking
Compliance with the EMC requirement is approved with the cable FX-20P-
CAB0/EN. For the action to be taken to any other cable, refer to head page.
Tightening bolt (M4
4
´
Application
For FX /FX /FX /FX
0 0S 1S 0N
(with mini-DIN, 8-pin connector)
For FX /FX/FX Series (with D-sub, 25-pin connector)
1 2C
Introduction 1
10DM main body
CLR FNC
25)
´
4
´
/FX /FX /FX Series
1N 2N 2NC
1-8
ENT
´1