Creation Of Messages - Mitsubishi MELSEC-F FX-10DM-E User Manual

FX-10DM-E DISPLAY MODULE
6.3.6

Creation of messages

You should create character strings to be displayed in sequence programs. This paragraph
describes a setting example for displaying only messages. Displayed character strings can be
changed over in programs.
Program creation procedure
1. In "DISPLAY SET" in the 10DM, set the display setting and the device.
Table 6.6:
Item No.
2. Convert character strings to be displayed into ASCII codes in accordance with the ASCII table.
Table 6.7:
Display example
Production
Drive
3. Assign characters to data registers as follows.
Characters are displayed in the order of "upper 8 bits → lower 8 bits" of data registers.
Assignment
P r
50H 72H
Upper Lower
bits bits
D100
1
ASCII code (hexadecimal)
50, 72, 6F, 64, 75, 63, 74, 69, 6F, 6E
o d u c t
6FH 64H 75H 63H 74H
Upper Lower Upper Lower Upper
bits bits bits bits bits
D101 D102 D103
Device
D0
44, 72, 69, 76, 65
Input "00H" at the end of display.
i o n
69H 6FH 6EH 00H
Lower Upper Lower Upper Lower
bits bits bits bits
D104 D105
Display Function 6
Display setting
4: MESSAGE
Assignment
D100 or more
D110 or more
00H
bits
6-17
1.Introduction
2.Specifica-
tions
3.Installation
Wiring
Maintenance
4."SYSTEM
MODE"
Menu
5.Environ-
mental
Setting
"MONITOR
SET"
"OTHER"
6.Display
"ENTRY
MONITOR"
DEVICE
MONITOR
7.Attachment
ASCII codes
Setting sheet
Error mes-
sage list