OutdoorAP_Description.fm
Mounting the HiPath Wireless Outdoor APs
Mounting the HiPath Wireless Outdoor AP with mounting plate
22
3.5.4 Fitting the mounting plate to a DIN rail
To fit the mounting plate to a DIN rail:
1. Place the mounting plate with the two catches (Position A in
upper edge of the DIN rail.
Figure 13
Mounting plate with fittings for DIN rail mounting
2. Pull down the DIN rail sliding catch (Position B in
mounting plate against the DIN rail until the sliding catch engages.
Figure
HiPath Wireless Outdoor AP Installation Guide
Figure
13) on the
13) and press the
9034532, October 2009