Table of Contents
Advertisement
OutdoorAP_Description.fm
Mounting the HiPath Wireless Outdoor APs
Mounting the HiPath Wireless Outdoor AP with mounting plate
20
To screw the cover plate to the mounting plate for the cables feedthrough:
1. Fit the cover plate on the mounting plate from below until the two lugs
(Position A in
Figure
Figure 11
Fitting and securing the cover plate for the cable feedthrough
2. Secure the cover plate to the mounting plate with two M4 screws. The screws
are supplied with the assembly kit.
11) engage the lower edge of the mounting plate.
HiPath Wireless Outdoor AP Installation Guide
9034532, October 2009
Advertisement
Table of Contents
