Fitting The Hipath Wireless Outdoor Ap To A Mounting Plate - Siemens HiPath V6R1 Installation Manual

OutdoorAP_Description.fm
Mounting the HiPath Wireless Outdoor APs
Mounting the HiPath Wireless Outdoor AP with mounting plate
24
3.5.6 Fitting the HiPath Wireless Outdoor AP to a
mounting plate
To fit an HiPath Wireless Outdoor AP to a mounting plate:
1. Lead the cables into the housing of the HiPath Wireless Outdoor AP (Position
A in Figure 15). For more information, see
the HiPath Wireless Outdoor
Figure 15

Fitting the HiPath Wireless Outdoor AP to a mounting plate

2. Fit the HiPath Wireless Outdoor AP so that the upper edge of the rear of the
housing is below the two catches of the mounting plate (Position B in
15).
3. Push in the HiPath Wireless Outdoor AP until it engages in the notches at the
lower edge of the mounting plate (Position C in
Chapter 4, "Connecting cables to
AP".
Figure
HiPath Wireless Outdoor AP Installation Guide
Figure
15).
9034532, October 2009