Installing On A Din Rail / Removing - Siemens SIMATIC NET SCALANCE W720 Operating Instructions Manual

Mounting

4.1 Installing on a DIN rail / removing

4.1 Installing on a DIN rail / removing
Procedure for installation{xe "Installation:DIN rail"}
Follow the steps below to fit the SCALANCE W760/W720 to a DIN rail:
1. Place the device on the upper edge of the DIN rail as shown in the figure.
2. Press the device against the DIN rail until the DIN rail slider catch locks in place.
3. Mount the connecting cables and the antenna, see section "Connecting up (Page 31)".
28
Operating Instructions, 10/2019, C79000-G8976-C322-11
SCALANCE W760/W720